How to use Dry Koji for sake brewing

Koji usually have 25% of water just after it’s produced, but Dry Koji contains less than 8% water.  That’s why it have good sanitary and storage quality. You can use it whenever you want without steaming rice process. With adding water, it come back to the quality like just after produced.

  • Which process of sake brewing can we use it ?
    You can use every process like Sake Starter, Soe, Naka, Tome.
  • Which amount of Dry Koji should we use it ?
    You can use it as same as usual sake brewing composition.
  • Which amount of Dry Koji should we use it against the usual Koji?
    Koji rice amount × 0.86 = Dry Koji amount In case of using 100kg of Koji rice for usual brewing, you should use 86kg of Dry Koji
  • How should we send the Dry Koji to the tank?
    Basically, you can send it directly to the tank as usual like air-shooting, or sending with seamed rice or α-Rice. You should mix it carefully just after sending to the tank.
  • When should we send Dry Koji to the tank?
    Compared to usual Koji, Dry Koji need a little longer time to melt the rice. Generally, it need one or two hours longer than as usual. That’s why we recommend you start to send it to the tank one hour before as usual.
  • What amount of additional water should we send to the tank?
    You should send 20% to 25% of additional water against the weigh of Dry Koji. In case of using 100kg of Dry Koji, you should add 20 liter of water.
  • When should we send additional water to the tank?
    Basically, you should send additional water when you send the Dry Koji.
  • Sample composition of sake brewing
    In Case of using 600kg rice in total
    Composition
    Sake starter
    Soe
    Naka
    Tome
    Total
    Total Rice
    45
    90
    155
    310
    600
    Steamed Rice
    30
    60
    120
    270
    480
    Koji Rice
    15
    30
    35
    40
    120
    Dry Koji
    13
    26
    30
    34
    103
    Water
    57
    94
    193
    442
    786
    Additional Water
    3
    6
    7
    8
    24

    In case of using 600kg rice in total, you need 103kg of Dry Koji, and 24liter of additional water.

  • Temperature
    When Dry Koji absorb water, it generate a little heat, so you should set the starting temperature a little lower than as usual. We recommend one or two degree lower. You don’t necessary to use temperature controlled tank.
  • Mash Process
    Because Dry Koji need a little longer time to absorb water, to producing glucose is generally slower than as usual.
  • Other difference from usual sake brewing
    The alcohol contents is as same as usual brewing. Acidity is tend to be a little lower than as usual.